How Miami Hotels and Spas Plan a Red Light Room

The short answer: a Miami hotel or day spa can plan a red light room around one full-body panel, a dedicated 20 A circuit, and 100–120 square feet of conditioned space. Where rewiring is not practical, a half-body panel on a standard outlet fits in 60–80 square feet. Sessions take 10–20 minutes and sit on the spa menu as an add-on or a stand-alone booking.

Where a red light room fits in a Miami property

Most Miami properties already have three candidate spaces, and each suits a different guest.

  • Spa suite or unused service room. The natural home. Guests are already in robes and already booking by the half hour, so a 10–20 minute session slots in before or after a massage or facial.
  • Fitness center. Suits hotels whose guests train in the morning. A half-body panel near the stretching area becomes a recovery corner that supports post-workout muscle recovery.
  • Residence or club floor amenity. For branded residences and club-level floors, a small bookable room adds a private amenity without adding staff.

Pick the space first, then the panel. Avoid anything open to the pool deck, the beach, or an unconditioned corridor. Coastal humidity and salt air are hard on any electronics, so keep the panel indoors, in a normally air-conditioned room, and ask any supplier for the operating temperature and humidity range in writing.

Space, privacy, and guest flow

A full-body room needs 100–120 square feet: enough for a 70.9 in panel on the wall, a standing spot 6–12 in from the face, a bench, a hook, and a mirror. A half-body room needs 60–80 square feet.

Privacy matters more than size. Guests stand close to the panel in spa attire or swimwear, so a lockable door is better than a curtain. Plan the route from the changing room so guests do not cross a public corridor.

Lighting design is part of the experience. Keep the room's own lights on a dimmer, use a neutral wall finish, and leave space for a small shelf with goggles and sanitizing supplies. Every Solgrade panel ships with eye protection, and every guest in the beam wears it.

For hotel spas, a red light room also works as a waiting step: guests can book a 10–15 minute session while a massage room is reset.

Power: plan the circuit before the fit-out

The Solgrade Elite 6000 draws 2,000 W and needs a dedicated 20 A circuit installed by a licensed electrician. In a hotel, that work usually goes through engineering and, in condo-hotels, the association. Add it to the scope early, ideally alongside any other spa refresh, so the panel is not waiting on an electrical change order.

The Solgrade Elite 1500 draws 500 W at the wall and runs on a standard outlet. It is the practical choice for a fitness center corner, a residence-floor amenity, or a spa that wants to open this season and wire a full-body room later.

The Elite 6000 weighs 89.5 lb and needs two people to install. A wall bracket is included; stands are sold separately. The Elite 1500 ships with a wall bracket and a door hook.

Which panel fits a hotel or spa

Solgrade Pro 300 Solgrade Elite 1500 Solgrade Elite 6000
Best for Retail shelf, take-home, service-room add-on Fitness center, residence amenity, half-body room Spa suite, full-body room
LEDs 60 300 dual-chip 1,200 dual-chip
Wavelengths 630 · 660 · 810 · 830 · 850 nm 630 · 660 · 810 · 830 · 850 nm 630 · 660 · 810 · 830 · 850 nm
Panel size 10.6 × 9.1 in 35.8 × 11.8 in 70.9 × 23.6 in
Draw at the wall 101 W 500 W, standard outlet 2,000 W, dedicated 20 A circuit
Controls Touchscreen, app, six one-touch presets Backlit LCD, physical buttons, remote LCD, physical buttons
Price $349 $899 $3,499

Physical buttons suit hospitality. Spa attendants rotate across shifts, and a panel that starts without a phone or an account is one less thing to train. All three panels carry a 3-year warranty.

Pricing it on a Miami spa menu

Typical US pricing for a full-body session runs $50–$150, averaging about $85; half-body sessions run $40–$100. Miami Beach and Brickell properties generally price toward the upper end of those ranges.

Three formats work on a hotel spa menu:

  • Add-on to an existing service. A 10–15 minute session before or after a massage or facial, priced as an enhancement.
  • Stand-alone booking. A 20-minute slot that guests and local day-pass visitors can book on their own.
  • Package and membership. For local members, red light access fits into memberships that typically run $99–$299 per month.

At roughly 2 sessions per hour per panel, an Elite 6000 at $85 a session covers its $3,499 panel price in 42 sessions, before electrical and room costs. For more revenue formats, see 5 ways spas and hotels monetize a recovery room.

Running it day to day

  • Book it like any spa room. Set it up as a 20-minute resource in your spa booking system: a 10–15 minute session plus 5 minutes to reset.
  • Write a one-page session card. Distance from the panel, goggles on, session length, what to wear. An attendant should be able to start a guest in under a minute.
  • Clean between guests. Wipe the bench and goggles after every session, the same way you reset a massage room.
  • Keep the menu language right. Describe sessions in wellness terms: promotes relaxation, supports healthy-looking skin, helps you feel refreshed. No medical claims on the menu, the website, or in-room collateral.

Solgrade stocks panels in Miami and Brooklyn, with local delivery across Miami Beach, Brickell, Downtown, Edgewater, and Wynwood. Properties planning more than one room, or more than one location, can apply for partner pricing.

FAQ

How much space does a hotel spa need for a red light room?

Plan 100–120 square feet for a full-body room and 60–80 square feet for a half-body room, in a normally air-conditioned indoor space.

Does a full-body panel need new wiring?

The Solgrade Elite 6000 draws 2,000 W and needs a dedicated 20 A circuit installed by a licensed electrician. The Elite 1500 draws 500 W and runs on a standard outlet.

Can a panel go on a pool deck or terrace?

Keep panels indoors in a conditioned room. Ask any supplier for the operating temperature and humidity range in writing before choosing a location.

What do Miami spas charge for a red light session?

US full-body sessions typically run $50–$150, averaging about $85, and half-body sessions $40–$100. Miami Beach and Brickell properties generally price toward the upper end.

Is eye protection included?

Yes. Every Solgrade panel ships with eye protection, and every guest in the beam should wear it.

Request partner pricing or see the Solgrade Elite 6000.

Solgrade™ products are general wellness devices. They are not medical devices and are not intended to diagnose, treat, cure, or prevent any disease or medical condition.

Back to blog